1.2.0
V0.17.4nl (2022-11-18)
This is a release without lora functionality (no-lora)
V0.17.4 (2022-01-20)
removed test and staging environments
set QoS to 1 for the out messages
V0.17.3 (2022-01-13)
updated environment def (mqtt hosts)
V0.17.2 (2021-07-13)
Better control of mqtt out messages (popping from the buffer)
V0.17.1 (2021-02-18)
Imelda: On incoming mqtt message, only the last 4 digits of the phone number are kept
Disabled TLS check for registration check (in the TLS client node)
V0.17.0 (2020-09-28)
Updated to DECT API v4.x
V0.16.0 (2020-09-17)
Reorganized worksheets
Lora will never delete devices automatically, but there is an option on the Troubleshooting page to remove the devices which are not anymore present in the remote configuration
V0.15.3 (2020-08-21)
Updated format of lora messages published via mqtt
V0.15.2a (2020-08-20)
Modbus request timeout is limited to 10s now
Fixed incorrect handling of modbus write requests
V0.15.1a (2020-07-14)
lora messages are sent to a different topic and they have a custom format
V0.15.0a (2020-07-01)
Implemented Lora protocol
V0.14.0 (2020-05-07)
Implemented DECT communication
V0.13.2 (2020-01-13)
Added mqtt status logging to troubleshoot LIFO buffer
added wan monitor node to the buffer output enable/disable logic
V0.13.0 (2019-12-18)
Implemented LIFO buffer, removed Smartbuffer
V0.12.0 (2019-11-07)
Uses Smartbuffer now
V0.11.2 (2019-10-18)
increased QoS of the write messages to 2
V0.11.1 (2019-10-18)
if mqtt will not reconnect for a while, restart the flow
V0.11.0 (2019-10-08)
Implemented wwan signal strength reporting
V0.10.2 (2019-09-26)
Optimization for the mqtt queue: Since the mqtt queue unnecessarily stores all the properties of the message in the queue, a new message is now sent to mqtt out containing just the topic and payload
V0.10.1 (2019-09-23)
Increased mqtt queue to 2000 records
V0.10.0 (2019-09-20)
Implemented the new registration call
V0.9.12 (2019-09-19)
adedd logging nodes for mqtt control and sentry
improved modbus error handling for reads and writes
v0.9.11 (2019-09-19)
handles ILLEGAL DATA ADDRESS error
V0.9.10 (2019-09-19)
changed mqtt Acc port to 8993 (request by Geert)
V0.9.9 (2019-09-19)
removed erroneous delay after a modbus error
V0.9.8 (2019-09-16)
small debug improvement added
V0.9.7 (2019-09-12)
offset and correctionFactor were not processed when writing (were not in the original specs). Implemented as requested by Geert
V0.9.6 (2019-09-11)
as requested by Geert on 11/09/2019, we'll look for offset and correctionFactor first at the modbusRegisterConfigs level, then at the modbusvalues level
V0.9.5 (2019-09-10)
Fixed modbus write (baudrate was wrong)
V0.9.4 (2019-09-10)
translation field was not working for read operations
V0.9.3 (2019-09-06)
Back to the increasing registration check delays, from 60 seconds to 1 hour with doubling the delay
V0.9.1 (2019-07-25)
identical sentry messages are ignored
more info sent to sentry
added some nodes to help troubleshooting mqtt messages
V0.9.0 (2019-07-12)
production port is 8993
added {version} to the register call
the flow version is displayed on the UI page
V0.8.5 (2019-07-05)
modbus timeout represents the timeout in ds (deciseconds, or tenths of seconds)
V0.8.4 (2019-07-05)
removed the frequency factor
V0.8.3 (2019-07-05)
set the default environment to Prod
set the environment list
V0.8.2 (2019-07-05)
fixed LED modes
V0.8.1 (2019-06-14)
Write errors are handled the same as the read errors (modbuserror + sentry)
Write status message contains a hardcoded field type = 'WRITE'
V0.8.0 (2019-06-14)
Write operations updates:
implemented expiration feature
write status will be posted to a different topic
uuid will be copied from the request to the status message
"result" field is now a string: EXECUTED/ERROR/EXPIRED
V0.7.5 (2019-06-14)
COIL and DISCRETE values are supported now
V0.7.4 (2019-06-14)
logs the configuration objects by uuid, for troubleshooting purposes
V0.7.3 (2019-06-14)
logs the last message sent via mqtt, by uuid, for troubleshooting purposes
V0.7.2 (2019-06-14)
if the value cannot be decoded, treat is as an error and send it to sentry as well
V0.7.1 (2019-06-12)
The unhandled modbus errors will not be sent via mqtt
V0.7.0 (2019-06-12)
implemented LED status
V0.6.2 (2019-06-12)
fixed EBADQUANT modbus erorr
V0.6.2 (2019-06-11)
enabled queing feature of mqtt out
V0.6.1 (2019-06-11)
release nr. and SNR are displayed as node info
Modbus errors are sent to sentry
Implemented sentry error reporting
Implemented GPS data reporting